Product was successfully added to your shopping cart.

Go to cart page

You have successfully subscribed to this product. You will receive an email when the product is in stock.

Network cable analyzer and identifier for cat5, cat5e, cat6 utp cables

Peak UTP05: Atlas IT Cat5 Network Cable Analyzer

Peak UTP05

In stock

+ -

Free ground shipping on orders over $75.
More info...

Atlas IT Network Cable Analyzer

Test your RJ45 network cables with the Peak UTP05: Atlas IT Cat5 Network Cable Analyzer, the safe and efficient way to analyze and identify Cat5, Cat5e, Cat6 (RJ45-based) network cables, sockets and patch panels. There is no better tool to test your cable configurations. The Atlas IT Network Cable Analyzer will instantly detect cabling issues and display the exact source of the problem, even if faults are present.  

Please Note: Atlas IT UTP05 not suitable for RJ11.  Using this instrument with RJ11 plugs will cause damage to its socket.

Easy to use for fast cable testing

After connecting network cable to the Atlas IT and Atlas IT Terminator, press the “test” button, and in seconds, you’ll get a reading on the green-mode display, showing exactly which connections require attention.

Peak Atlas IT UTP05 Features

  • Automatic identification of cable configuration:
    • Straight-through patch (4, 6 and 8 way types)
    • Crossover (several types)
    • Token-Ring, Cisco Twisted
    • Ethernet cconomisers
  • Quickly find faults, like broken/shorted/swapped wires
  • Tests all 8 signal lines. Shielding connection itself not tested
  • Display of standard wiring colors
  • Optional terminators to identify cable runs by number
  • Protected against voltages present on live voice and data systems
  • Lightweight, portable design
  • Easy to Use: Connect cable to Atlas IT and terminatorand press test

What's Included?

  • Peak Atlas UTP05 IT Cable Analyzer Instrument
  • 2 Terminators - non-identified types
  • Fitted battery and spare battery
  • 2 250mm patch cables for socket and patch panel testing
  • Comprehensive illustrated user guide, including full-color chart for 8 most common cable configurations
  • Padded carry case with extra space for accessories

Product Downloads

 User Guide for the Atlas IT UTP05 Network Cable Analyzer by Peak Electronics

 Universal Ethernet Wiring Diagrams


Network Cable Category5 Cat 5, 5e, 6 (UTP)
Connection Type RJ45, 8 pin.
Maximum Cable Length1 150 meters (500 feet)
Test Voltage ±5V
Test Current ±2.5mA
Protection Rating2, 3
  • ±15V
  • ±80V
Operating Temperature Range4 10°C to 50°C
Battery Voltage Range 7.0V to 13.0V
Battery Type GP23A 12V Alkaline
Atlas IT Dimensions 103 x 70 x 20 mm
Terminator Dimensions 18 x 15 x 14 mm

Foot notes:

  1. Shield connection is not tested
  2. Dependant on quality of cable, connections and influence of external interference
  3. Specified for durations no longer than 60 seconds
  4. Specified for durations no longer than 15 seconds
  5. Subject to acceptable LCD visibility
  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *




Have a question?

* required fields

 Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product