Product was successfully added to your shopping cart.

Go to cart page

You have successfully subscribed to this product. You will receive an email when the product is in stock.


Velleman DVM890F: Digital Multimeter-30 Ranges

Velleman DVM890F

In stock

+ -

Free ground shipping on orders over $75.
More info...

The Velleman DVM890F 30-Range Multimeter

The Velleman DVM890F is a low-cost multimeter that measures temperature, capacitance, and frequency. With this multimeter, you can also perform transistor, diode, and audible continuity testing. This multimeter is ideal for light duty maintenance and learning how to use and operate a multimeter. Readings are displayed on a 3 1/2 digit LCD screen. The Velleman DVM890F is powered by a 9V battery and has an auto-power off feature.


  • DC voltage: 200m/2/20/200/1000V
    • basic accuracy: ±0.5%
    • input impedance: 10Mohm
    • maximum input: 1000V
  • AC voltage: 2/20/200/700V
    • basic accuracy: ±0.8%
    • input impedance: 10Mohm
    • frequency range: 40-400Hz
    • maximum input: 750V
  • DC current: 2m/20m/200m/20A
    • basic accuracy: ±0.8% (±2.0% for 20A range)
    • overload protection: 0.2A (20A for 20A range)
  • AC current: 20m/200m/20A
    • basic accuracy: ±0.8% (±3.0% for 20A range)
    • overload protection: 0.2A (20A range not fused)
  • Resistance: 200/2k/20k/200k/2M/20M/200M
    • basic accuracy: ±0.8% (±5.0% for 200M range)
    • overload protection: 250V
  • Capacitance: 2000p/20n/200n/2µ/20µF
    • accuracy: ±2.5%
  • Frequency: 20kHz
    • basic accuracy: ±1.0%
    • overload protection: 250V DC/AC
  • temperature: -58°F to 1832°F
    • basic accuracy: ±0.75%
  • Overrange: yes "1"
  • Continuity buzzer: yes
  • Maximum display: 1999
  • LCD display size: 1.2" x 2.4"
  • Ranging mode: manual
  • Data hold: no
  • Backlight: no
  • Dimensions: 3.5" x 6.7" x 1.5"
  • Weight (with battery): ± 12.0oz



  • Very complete model
  • Low-battery indication, overload protection and automatic deactivation
  • DC current max. 20A, DC voltage max. 1000V
  • AC current max. 20A, AC voltage max. 700V
  • Resistance measurements: up to 20Mohm
  • Capacitance measurements: from 2000pF to 20µF
  • Frequency measurements: max. range 20kHz
  • Temperature test range: from 32°F to 104°F through built-in sensor
  • K-type thermocouple measuring range: from -58°F to 1832°F
  • Accessories: manual / test leads / holster / battery / temp. probe
  • Packaging: blister
  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *




Frequently Asked Questions

Q. Is a replacement capacitance adapter/connector available? To be completely clear, this is a small connector which inserts into the Cx jacks on the front of the DVM890F meter and provides spring-loaded connections for capacitors.


Unfortunately, this part is not sold separately. Please contact Tech Support to claim warranty or troubleshoot your device: 817-284-7785.

Q. How do you check continuity with the DVM890F?


For continuity tests: connect the test leads to two random points of the circuit to be tested. The incorporated buzzer is activated if the resistance between the two test leads is lower than ± 30Ω.

Have a question?

* required fields

 Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product