The Velleman K8015 Mutifunction Relay Switch Kit
With timers, delays, flashers, intervals, and blinkers, this switch kit has it all. The K8015 has 14 different functions that operate using two pre-programmed delays. There is also a learning mode for the delays that allows you to reset time durations anywhere between two seconds and 12 days. The board hosts a transient filter for the relay contacts.
Use to control incandescent lights, halogen lights, fluorescent lights, fans, buzzers, valves, and more. Delay times are stored on an EEPROM to protect from any power failures.
Different modes can be selected by setting on-board DIP postions.
| Momentary Mode | Start/stop Timer | Random Timer |
| Trigger-at-release Timer | Non re-triggerable Timer | Turn-on Delay |
| Timer with Early Re-trigger Prevention | Turn-off Delay | Toggle Mode |
| Interval Timer | Blinking Circuit | Blinking Circuit with Timer |
| Staricase Timer | Dual-time Staircase Timer | Interruptible Staircase Timer |
For a plug-in module, view the Velleman K8008. The K8015 kit requires assembly (85 soldering points).
Specifications
- Operating voltages: 9-12V AC or 12V DC
- Max. load: 5A (1100W/230V)
- Dimensions pcb: 3.4 x 1.5 x 1"
Additional Information
| Difficulty Level | 3 |
|---|
Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product
