Loading..

Product was successfully added to your shopping cart.

Go to cart page

You have successfully subscribed to this product. You will receive an email when the product is in stock.

Imprimante 3d vertex

Videos

Imprimante 3d vertex

5
Velleman K8400
599,00 $US

Disponibilité:
En stock

Livraison gratuite sur les commandes de plus de 75 $.
Lire la suite....

Imprimante 3d vertex.

Option: 2e tête pour imprimante vertex 3d printer k8402 visitez notre vertex 3d printer site web: www.vertex3dprinter.eu le vertex est le kit d'imprimante 3d nouvelle génération de velleman. facile, précis, abordable et open source. maintenant disponible: un set d'outils de 10 pièces pour vous aider à assembler l'imprimante 3d vertex vtset8400 information before you build.

Specifications

  • impression:
    • technologie d'impression: Fused Filament Fabrication (FFF)
    • résolution de couche: standard: 0.1 mm (maximum: 0.2 mm - minimum: 0.05 mm)
    • dimensions de plaque: 215 x 240 mm (8.46" x 9.45")
    • Volume d'impression: 180 x 200 x 190 mm (7" x 7.8" x 7.5")
    • Vitesse d'impression: 30 mm/s - 120 mm/s
    • Vitesse de déplacement: 30 mm/s - 300 mm/s
    • Surface de la plaque: Couche amovible de BuildTak™ (longévité limitée, vendue séparément)
    • diamètre du filament: 1.75 mm (compatible avec toutes les bobines de filament avec trou de montage de 53 mm). Accepte tous les filaments standard.
    • filaments: PLA, ABS. Testing avec d'autres matériaux en cours.
    • diamètre des hot ends 1 & 2: 0.35 mm. 1 hot end livré. Deuxième hot end optionnel.
    • Distance entre les hot ends: 23.7 mm
    • température de travail maximale du hot end: 260°C
  • logiciel:
    • firmware: Modified Open Source Marlin 3D Printer. Firmware - peut être actualisé
    • logiciel: Repetier - CuraEngine - Slic3r (RepRap compatible)
  • Matériel:
    • dimensions: X Y Z 360 - 380 - 395 mm (14" x 15" x 15.5") (sans bobines de filament)
    • boîtier: panneaux en polycarbonate et pièces moulées en ABS et renforcées de fibre
    • poids: 10 kg
    • average noise level during operation: 52 dBA (at 1 m)
    • ambient operation temperature: max 25 °C
    • température de stockage: - 10 °C to + 40 °C
  • circuit électrique:
    • communication: USB 2.0 ou carte SD
    • contrôleur: basé sur la technologie AVR ATmega2560. avec possibilité d'une 2nde tête (K8402 non inclus) et d'un lit chauffant (non référencé)
    • afficheur: écran LCD bleu à rétroéclairage blanc, 4 x 20 caractères
    • entrée CA: 100 - 240 VCA 50-60Hz 150 W max.

Informations complémentaires

Difficulty Level 5
  1. Soyez le premier à commenter ce produit

Rédigez votre propre commentaire

Download

Vertex 3D printer firmware single head M1-V1.1-H1
Firmware for the Vertex 3D printer with one nozzle. Version M1-V1.1-H1 [i][b]DO NOT FORGET TO RELOAD THE EEPROM SETTINGS AFTER THE UPGRADE![/b][/i]

Vertex 3D printer Repetier Host 1.0.6
Version 1.0.6. for legacy use only!

Vertex 3D Printer Safety Manual
Important safety instructions.

Vertex PSU cover
Vertex Power Supply Unit terminal cover

Vertex 3D printer firmware dual head M1-V1.4-H2
Firmware for the Vertex 3D printer with dual nozzles. Version M1-V1.4-H2 [i][b]DO NOT FORGET TO RELOAD THE EEPROM SETTINGS AFTER THE UPGRADE![/b][/i]

Vertex 3D printer firmware single head M1-V1.4-H1
Firmware for the Vertex 3D printer with one nozzle. Version M1-V1.4-H1 [i][b]DO NOT FORGET TO RELOAD THE EEPROM SETTINGS AFTER THE UPGRADE![/b][/i]

Vertex bracelet
Vertex bracelet .STL file.

Vertex logo keychain
Vertex logo keychain .STL file.

Vertex 3D printer firmware dual head M1-V1.1-H2
Firmware for the Vertex 3D printer with dual nozzles. Version M1-V1.1-H2. [i][b]DO NOT FORGET TO RELOAD THE EEPROM SETTINGS AFTER THE UPGRADE![/b][/i]

Info Sheets

Datasheet
Product Information

Overview of Velleman modules that are equal to D.I.Y Kits
This sheet is useful when you want to know which modules you could find in the do-it-yourself range of Velleman Kits and minikits.

Infosheet
Resistor colour code

Options
Options for the K8400.

Frequently Asked Questions

Q. Does the K8400 kit come with a spool of filament ?

A.

No, the K8400 does not come with any filament.

Q. Does the 8400 printer come standard with the VM8400MB Atmega board that can be used for CNC, etc or what is the standard board used to drive the unit?

A.

Yes, the VM8400MB is included in the K8400. 

Q. Does this model come with a heated build plate?

A.

No. It includes a Buildtak sheet to print on – Velleman K8400-BT.

Q. Does the K8400 come with a single head extruder?

A.

Yes. It is supplied with a single print head, but is capable of dual extrusion. The second print head is Velleman K8402.

Q. Can I use this heater plate in the K8400 3D Printer?

A.
The P8200BED/SP is designed for the K8200.

Have a question?

* required fields

Accessories and spare parts

Top