Product was successfully added to your shopping cart.

Go to cart page

You have successfully subscribed to this product. You will receive an email when the product is in stock.

Vertex nano assembled 3d printer

Velleman VM8600: Vertex Nano 3D Printer - Assembled

Velleman VM8600

Velleman VM8600 Vertex Nano Assembled 3D Printer

The Velleman VM8600: Vertex Nano 3D Printer is the identical twin of the Velleman K8600: Vertex Nano 3D Printer in assembled form. The VM8600 is the same nano-sized printer without any of the assembly needed for the K8600. This desktop 3D printer only weighs 5 pounds and has a 9.1 in. x 5.9 in. x 6.3 in. frame.

Use the Vertex Nano to quickly print your creative ideas with a 40 mm/s print speed and a print resolution of 0.1 mm. The 3.15 in. x 3.15 in. build plate is magnetically attached to the x-axis and uses a BuildTak bed surface for easy removal of 3D prints. Connect your VM8600 via USB to a Windows, Linux or MacOS computer for board firmware updates. Load your prints directly with an SD card to begin printing.

Vertex Nano Key Features

Quality & Size

At under 10 inches tall and under 6 inches wide, print with the same, high-quality as the K8400 at a fraction of the size. Use 1.75 mm PLA or ABS filament to create professional quality 3D prints right from your desk.

Magnetic Removeable Bed Plate

The metal Nano bed plate magnetically attaches to the bed holder. After a print is completed, detach the bed plate for easy print removal.

Bed Leveling Memory

Manually set your bed leveling settings and save them to the K8600's memory.

Isolator Upgrade

Hotend isolator guides have upgraded from the K8400's plastic model to a new metal version. A fan is also attached to the hotend isolator to assist in temperature control.

Peace and Quiet Printing

Print your prototypes and projects in near silence with a low operating noise level of 45 dBA.

VM8600 Creations

Vertex Logos printed with Vertex Nano 3D Printer
Spiral Chess Pawn by BigBadBison printed with Vertex Nano 3D Printer. Source: http://www.thingverse.com/thing470700
Jack-O-Lantern by Makies printed with Vertex Nano 3D Printer. Source: http://www.thingverse.com/thing167043



Print Technology Fused Filament Fabrication (FFF)
Layer Resolution Standard 0.1 mm / 100 microns (Minimum: 0.05 mm / 50 microns, Maximum: 0.2 mm / 200 microns)
Build Plate 80 mm x 80 mm (3.15 in. x 3.15 in.)
Build Volume 80 mm x 80 mm x 75 mm (3.15 in. x 3.15 in. x 2.95 in.)
Print Speed 40 mm/s
Travel Speed 70 mm/s
Build Plate Surface Removable layer of BuildTak™ (consumable, also sold separately)
Filament Diameter 1.75 mm
Filaments PLA, ABS (testing with other materials in progress)
Maximum Nozzle Operating Temperature (Extruder Location: Back) 245°C
Maximum Nozzle Operating Temperature (Extruder Location: Front) 260°C



Firmware Modified Open Source Marlin 3D Printer. User upgradable.
Software Repetier - CuraEngine - Slic3r (RepRap compatible)



Dimensions 9.06 in. x 5.91 in. x 6.3 in. (230 mm x 150 mm x 160 mm)
Frame Sturdy, Metal Frame
Weight 5 lbs (2.3 kg)
Average Noise Level During Operation 45 dBA
Ambient Operation Temperature Max 25°C
Storage Temperature - 10°C to + 40°C



Communication USB 2.0 or SD card
Controller Board AVR ATmega2560 based
Display 4 x 20 char. blue LCD with white backlight
AC Input 100 - 240 VAC, 50-60Hz 150W max.
Logo LED illuminated


Vertex Nano 3D printer Repetier Host 1.6.2
Vertex Nano 3D printer Repetier Host. Version 1.6.2.

Info Sheets

Overview of Velleman modules that are equal to D.I.Y Kits
This sheet is useful when you want to know which modules you could find in the do-it-yourself range of Velleman Kits and minikits.

 Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product