Product was successfully added to your shopping cart.

Go to cart page

You have successfully subscribed to this product. You will receive an email when the product is in stock.

Extension set for k8200

Velleman K8206: Bed Extension Kit for K8200 3D Printer

Velleman K8206

Print Bed Extension Set for K8200 3D Printer Kit

Think big, print big! thanks to the hackable character of the Velleman K8200: 3D Printer Kit you can now enlarge the build plate to a size of 40 x 20 cm (15.75 x 7.9 inch)..


  • kit includes all necessary parts to upgrade your K8200
  • includes a 4 mm tempered glass panel bed
  • software: Repetier version 0.84 and up www.repetier.com


  • power supply: 15 VDC
  • technology: FFF (Fused Filament Fabrication) for PLA and ABS
  • linear ball bearings: 8 and 10 mm (0.314" and 0.393")
  • dimensions of printable area: 20 x 40 x 20 cm
  • FTDI USB: 2.0 to Serial
  • typical printing speed: 60 mm/s
  • maximum print speed: 150 mm/s (depending on the object to be printed)
  • extruded aluminum profiles: 27.5 mm / 1.08" wide
  • movement: 4 NEMA 17 stepper motors
  • resolution:
    • nominal mechanical resolution:
      • X and Y: 0.015 mm / 590.55 µin (smallest step the printing plate can move in the X and Y directions)
      • Z: 0.781 µm / 30.74 µin (smallest step the printing plate can move in the Z direction)
    • nominal printing resolution:
      • wall thickness (X,Y): 0.5 mm / 0.019"
      • layer thickness (Z): 0.20 - 0.25 mm / 0.0078 - 0.0098"

Additional Information

Difficulty Level 5

Info Sheets

Resistor colour code

Overview of Velleman modules that are equal to D.I.Y Kits
This sheet is useful when you want to know which modules you could find in the do-it-yourself range of Velleman Kits and minikits.

 Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product