The Velleman MK180 Flashing LED Electronic Kit
With the Velleman MK180, you can use with any kind of LEDs set up for 12 volts. This includes (but is not limited to) low current, high-power, LED strips, and clusters. With each channel output up to 3 amps max, you can operate with many LEDs. With seven flash effects and adjustable speed, this kit is sure to grab the attention of everyone. You can also detach the LED PCBs to spread the LEDs out.
Don’t have your own LEDs? That’s okay, the MK178 is supplied with (8) 20,000mcd white LEDs. Easy to use because of the one button selection. There a lot of places to use this kit: alarm systems, hazard flashers, attention grabbers and the list goes on. Small size main board 2.56” x 1.3” x 0.78” LED boards 0.71” x 1.3” x 0.47”. Two boards included.
Specifications
- Supply voltage: 12VDC
- Outputs: 3A/Channel max.
- Dimensions:
- main board:
- l x w: 65x33mm / 2.56x1.3"
- height: 20mm / 0.78"
- LED board:
- l x w: 18x33mm / 0.71x1.3"
- height: 12mm / 0.47"
Additional Information
| Difficulty Level | 2 |
|---|
- Be the first to review this product
Write Your Own Review
Frequently Asked Questions
Q. can the blinking rate be set to 40 Hz
Unfortunately, 40 Hz is not possible for the MK180.
Have a question?
* required fields
Warning: this product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov/product
